This tutorial will guide you step-by-step on how to import print templates for the DF2 printer.
Step 1: Open the Materials Tab
·Click on the Materials tab to open it.
Step 2: Access the More Options
·Click the More button to expand additional options.
Step 3: Select Import Option
·Select Import from local disk from the dropdown menu.
Step 4: Select the Template File
·A file explorer window will pop up. Navigate to the location where you have saved the DF2 print template file.
·Select the template file from your local disk. We will take the 0.1 – Speed – DF2 – Standard White V1.dlpbin template as an example.
·Click on Open or Import in the file explorer window to confirm your selection.
·The software will start importing the template. This may take a few moments.
Step 5: Finalize the Import
·After the file is imported, press the OK button to finalize the process.
Step 6: Verify Template Selection
·The template you just imported should appear in the menu as shown below. In the case of the 0.1 – Speed – DF2 – Standard White V1.dlpbin template, it is the template you should use to print at 30mm/h.
[26.029-EN.1.0.20240709-DF2-How to Import DF2’s Templates into ideaMaker]
-END-
