Tools Needed:
① Scissors x1
② Utility knife x1
1. Place the box of the DF2 printer in an open area. Keep a separation distance of 50 cm around the box for unpacking.
2. Cut the packing straps with scissors, and then cut the packing tape along the top of the box with a utility knife.
3. Open the box, remove all the cardboard spacers, and remove the cardboard.
4. There is a “Raise3D DF2 3D Printer Quick Start Guide”, a power cord matching the local standard, and a DF2 tool box on Styrofoam. Take out them, and carefully store them for future operations.
5. Remove the Styrofoam, and then remove all the cardboard spacers.
6. It is recommended having a second person to help you remove the cardboard box.
7. Remove the protective bag. It is recommended having a second person to help you. Together, lift the printer out of the foam padding. Then carefully place it in an open area.
8. Unboxing the DF2 printer is complete.
9. For details on how to install and start up the DF2 printer, please refer to chapter C Installation and Startup in the document “Raise3D DF2 3D Printer User Manual”. For details on how to unbox the auto-feeding station, please refer to the document "How to Unbox the Auto-Feeding Station".
