loading...

How to Calibrate the XY Offsets

1.Select the “Gear” icon at the upper right corner of the screen.


2.Select the “Maintenance” at the bottom left corner of the “Machine” settings.


3.Then select the “Offset Calibration” at the bottom left corner.


4.Make sure the following requirements are all met, and select the “Start”.


5.Then perform the last two steps to adjust the XY offsets of the right nozzle to align it with the left nozzle.


- END -

article.question
article.yes_notice
article.yes_notice help.raise3d.com
article.yes
article.no