loading...

How to Clean the Printing Surface

[ Manual E2 – How to Clean the Printing Surface – V1.0 ]

1.Printing Surface can be cleaned with warm water or isopropyl alcohol. Soap or other cleaning products should not be used.


2.If an adhesive has been applied to the surface, use warm water to soften it and use the included scraper to remove the adhesive.



[ Manual E2 – How to Clean the Printing Surface – V1.0 ]


-END-

article.question
article.yes_notice
article.yes_notice help.raise3d.com
article.yes
article.no