How to set the "Z Probe Offset" Manually

1.Select the “Gear” icon at the right upper corner of the screen.

2.Select the “More Settings” at the bottom right corner of the “Machine” settings.

3.Then select “Hardware” in the left part of the screen.

4.Select the “Z Probe Offset”.

5.Choose the left or right nozzle (the one you want to set), then enter the value in the input box.

Note: Adjusting the value of hotend on the left will make the same adjustment on the right,

But adjusting the value of the right hotend will not affect the value of the left hotend.

- END -