loading...

How to Update the Motion Controller Firmware

[ Manual E2 - How to Update the Motion Controller Firmware - V1.0 ]

1. Download the latest version of the Motion Controller firmware from the Official Website / Support Center/ Download Center.

Save the Motion Controller firmware file in the root directory of the USB drive (please do not change the name of the downloaded firmware file,

otherwise the update process will fail). Then insert the USB drive into the USB interface at the top of the printer. The USB drive is attached with the printer.

(Please download the latest firmware from the following link: https://www.raise3d.com/download/


2. Select the “Print” icon in the bottom right corner of the home page.


3. Select the “USB storage” icon.


4. Select the "Currently Inserted USB Device" icon.


5. Select the downloaded new version of the Motion Controller firmware in the root directory folder.


6. Select "Yes" in the pop-up dialog box.


7. The printer will start the firmware installation process automatically.


8. After the firmware update is completed, the screen will display "Please restart the printer to update the firmware”,

which means that the Motion Controller firmware has been updated.


9. Power off the printer, and then power on again after 30 seconds.

Note: The printer's power switch is located next to the power cable on the back of the printer.


10. After power on again, the screen will automatically display the home page. Select the “Setting” icon in the upper right corner of the home page.


11. You can confirm the version number of the updated Motion Controller firmware in the “Machine” interface.


-END-


[ Manual E2 - How to Update the Motion Controller Firmware - V1.0 ]