loading...

How to Apply Glue on Build Plate for PA12 CF+ Filament?

A: When printing PA12 CF+ with the E2CF, Magigoo PA glue is recommended to increase plate adhesion. First, preview the GCODE file of ideaMaker to locate the printing area on the build plate. Then spread glue on the area. Refer to this guide when applying Magigoo PA. Freshly applied glue on a plate can last for several rounds of printing.


-END-

article.question
article.yes_notice
article.yes_notice help.raise3d.com
article.yes
article.no