Required tools:
① Raise3D Dry Box
② Desiccant
Due to the water absorption characteristics of nylon, PA12 CF+ and the PA12 CF support filament must be stored in a dry environment to prevent these filaments from absorbing moisture in the air. The following is a short guide explaining how to store the PA12 CF+ and the PA12 CF support filament in a dry environment.
1. Make sure the desiccant is dry. If it is not, replace or refresh the desiccant. You can refer to this guide for drying the desiccant.
2. Seal off the feeding holes of the dry box by attaching a plug.
3. Place the dried PA12 CF+ filament and dried desiccant into the dry box. Then close the dry box.
-END-
