loading...

How to Upgrade the Motion Board Firmware

[ Manual N2&N2 Plus - How to Upgrade the Motion Board Firmware -V1.0 ]

1. Download the latest version of the Raise Touch software from Download Center.

Save the Raise Touch Firmware file inside the root directory of the USB drive which came included with your printer purchase. 

2. Power off the printer and insert the USB drive onto one of the available ports on the side of the touchscreen.


3. Power on the printer, and locate open the ‘Print’ tab on the touchscreen. Select the “USB Storage” icon. Within the folder select the Motion Controller Board software, and press “print”.


4. When the installation has completed, click the ‘Settings’ icon in the top right-hand side of any tab. Confirm that the firmware has been updated properly.(It may be necessary to restart the printer after updating the motion control board.)


[ Manual N2&N2 Plus - How to Upgrade the Motion Board Firmware -V1.0 ]


-END-

article.question
article.yes_notice
article.yes_notice help.raise3d.com
article.yes
article.no