[ Manual Pro2 Series - How to Disassemble Reset Button - V1.0 ]
① Phillips head screwdriver
② 10mm hex wrench
③ 2.5mm hex wrench
④ 2mm hex wrench
1. Make sure the power is off.
2. Use a Phillips head screwdriver to remove the four M4x8 retaining screws of the PC cover at right front corner and use a 2.5mm hex wrench to remove the four M3x8 countersunk screws at the front side of the cover.
Figure 1 Screws that need to be removed.
3. Take off the PC cover.
4. Use the 2mm hex wrench to remove the three retaining screws of the touchscreen assembly.
Figure 2 Screws behind the touchscreen assembly.
5. Use a 2mm hex wrench to remove the four M3x6 countersunk screws at the back of touchscreen assembly.
Figure 3 Screws behind the touchscreen assembly.
6. Carefully remove the back cover of the RaiseTouch assembly. Remove the battery cable and reset button.
Figure 4 Remove the back cover.
Figure 5 Unplug the Reset Button wire.
7. Use a 10mm hex wrench to remove the screw nut of reset button.
Figure 6 Remove the Screw nut.
Figure 7 The screw nut is removed.
8. Remove the reset button assembly from the back cover of touchscreen assembly.
Figure 8 Remove the reset button assembly.
Figure 9 Finish removing the reset button.
[ Manual Pro2 Series - How to Disassemble Reset Button - V1.0 ]
-END-