Nozzle selection: Select the nozzle that needs to be adjusted. “XL” represents for left nozzle; “XR” represents for right nozzle; “Y” represents for hot bed; “Z” represents for screw rod fixing nozzles.
Unit Settings: The distance that the currently selected component moves each step. It can be set to 10 mm,1mm or 0.1 mm per step.
Travel range: XL travel range [-3,330mm], XR travel range [32,365], Y travel range [-3,240], Z travel range [-3,240]
Click on the “XL”, a dialog box will pop up, asking you to enter the “XL absolute coordinates”. Enter the value, XL will be automatically adjusted to the corresponding position. XR, Y and Z can be adjusted the same way.
: Nozzle homing or Y axis homing (depending on whether the nozzle or Y axis is currently selected).
: Z axis homing.
: Homing nozzles, heat bed and Z axis.
: Unlocking all motors. This sign is not a warning sign, If the X axis and Y axis are homed, the extruders cannot be moved manually. Click the button to unlock the motor to remove the extruders.
-END-
