Select the camera and wait for the connection. Pictures can be viewed on RaiseTouch and ideaMaker after successfully connected.
Camera Interface
Select the camera and click “OK” to connect to the selected camera.
Click the camera button to view the picture taken on the RaiseTouch. Click the close button to turn off the camera function.
Connect Camera Interface
Note: 1. Camera is not accessible from your computer unless you are using ideaMaker version 3.1.7 or newer.
2. In the advanced settings, you can set “Auto Connect at Startup” to enable this function, after booting up, the machine will automatically connect the camera.
Camera Advanced Settings
-END-
