Click the Quick Settings button located in the top right of the Utilities tab to enter the Quick Settings interface.
Utilities Quick Settings Entry
Quick Settings Options
Preheat after recovery: Under this function, if you want to resume or restart the print job after power off, the nozzles will automatically heat up, and then extruder head will move to avoid the nozzle sticking to the model and causing the model to move.
Turn on filament sensor: In this function, the printer will activate the sensor to detect whether there is a shortage of filaments.
Cool down after loading or unloading filaments: In this function, the nozzle will automatically cool down after loading or unloading filaments.
Cool down after a print paused: In this function, the nozzle will automatically cool down after pausing printing.
Raise the Z-axis to a defined position after a print is stopped: In this function, when printing is stopped, the Z axis will be raised to the specified position.
Raise the Z-axis to a defined position after a print is completed: In this function, when a print is completed, the Z axis will be raised to the specified position.
Z Probe Offset: Set the probe offset in the z direction.
-END-
