support.support_center
Move Steps: the distance X/Y/Z will move per click, there are 3 types: 10.0mm, 1.0mm and 0.1mm.
Click the button X、Y and Z in the figure, and the setting interface of moving distance of the nozzle in the X/Y direction will pop up. Manually enter the distance needed to be moved and the system will automatically move the nozzle according to the set distance after click OK. Similarly, the displacement of the hot bed in the Z direction can be set.
：Home the extruder in X & Y directions.
：Home the build plat in Z direction.
: Disable all the five motors. (If the machine is a single-extruder one, then there are four motors in total.) You can push the head by hands after trigger this function.
-END-