Figure 1: Tune.
L-Nozzle temperature: the temperature of the left nozzle.
R-Nozzle temperature: the temperature of the right nozzle.
If your machine is a dual-extruder machine, it will show L-Nozzle temperature and R-Nozzle temperature.
If your machine is a single-extruder machine, it will only show Nozzle temperature here.
Heated bed temperature: the temperature of the heated bed.
Feed rate: the overall percentage of printing speed.
Fan speed: The speed of the part cooling fans.
Note: only the right-side downward fan on single-extruder machine can be controlled.
L-Nozzle flow rate: the flow rate of the left nozzle.
R-Nozzle flow rate: the flow rate of the right nozzle.
-END-
