Remove refers to deleting selected Printer Settings. Choose the printer template you want to remove from the Printer Type drop list and click Remove button.
Note: This function only works for the template which was added by duplicate.
Figure 1: Remove the selected Printer Settings.
If you want to remove the slicing templates under this printer, then check the ones you want to remove from the list on the left side. Then select "OK". The selected slicing templates will be removed.
Figure 2: Choose the templates you’d like to remove.
If you do not want to keep any slicing template under this printer type, check Remove All templates below. It will check all the slicing templates above. Then click "OK" button. All the slicing templates under this printer type will be removed together with this printer.
Figure 3: Remove All Templates.
If you want to keep one slicing template, please first make sure that it has been unchecked.
Figure 4: Remove the selected Templates.
Select it and choose the Printer and Filament at right side for it. Then press "OK" button below. The printer template will be removed, but this slicing template will be saved under the printer "RAISE3D Pro2 Plus" and the filament "PLA 1.75mm" in this case.
Figure 5: Move the selected Templates.
-END-
