loading...

How to Update Motion Controller Board Firmware


Tool:

① U disk


When do I need to update the motion controller board firmware?

1. After replacing a new version of the motion controller board, the firmware needs to be updated, otherwise the printer may not be able to print normally.

2. After you update the RaiseTouch firmware, please check and update the motion controller board firmware synchronously.


A. Check the motion controller board version number.

1. Check the version number of the motion controller board. Click the “Setting” button to enter the setting interface. Then click "Machine>Firmware Version" to check the current version number.

Figure 1 Check the motion controller board firmware version number.


B. Update the firmware.

1. After you replace the new motion controller board, you need to update the firmware Make sure that all cables are properly connected before updating, otherwise the update will fail.


2. Before updating the motion controller board firmware, please update your RaiseTouch to the latest version or the update will fail. How to update Raise Touch firmware, see Pro3 Series-How to Update RaiseTouch Firmware.



3. Click the "Settings" button in the upper left corner of the home page to enter the settings interface. Go to "Machine > Update > Local Update > Update Motion Controller Board Firmware", select the latest firmware file to update.

Note:

Fire with the “.firm” is the motion controller board firmware.

Figure 2 Update the firmware.


4. After updating the motion controller board firmware, please restart your printer.


5. Check whether the printer can operate normally. If you encounter any problems, please contact support@raise3d.com for support.



[15.059-EN.1.0.20220513-Pro3 Series- Motion Controller Board Firmware]



- END -


article.question
article.yes_notice
article.yes_notice help.raise3d.com
article.yes
article.no